M3 x 10mm Capstan Screws (DIN 404) - Stainless Steel (303) Description
The M3 x 10mm Capstan Screws (DIN 404) - Stainless Steel (303) has the following features:
- 4mm Head Length (H)
- DIN 404 Manufacturing Standard
- 10mm Length (L)
- 0.8mm Slot Width (A)
- Stainless Steel (A1) Material
- Stainless Steel (A1) Material Specification
- Natural Finish
- 0.5mm Thread Pitch
- M3 (3mm) Thread Size
- 5.5mm Head Diameter (D)
- +0/-0.12mm Head Diameter (D) Tolerance
- +/-0.38mm Head Length (H) Tolerance
- 1mm Slot Depth (Min) (P)
- 1.5mm Bottom Of Cap To Hole Centre
- 0.5mm Top Of Cap To Bottom Of Arc
- 1.5mm Head Hole Dia. (Max) (d)
Discover more about the Capstan Screws range.
DIN 404 Capstan Screws are part of Accu's Precision Screws range and they are designed with a broad cylindrical head, which features multiple radial holes for the insertion of a lever, cable or wire, which is then turned or wound around the screw for tension adjustment. A Capstan Screw is unique in that it can be turned from either the slotted drive, using a Slotted Screwdriver Bit, or from the holes in its side.
These components are widely used in metrology equipment and in musical instruments such as pianos, as they are capable of being adjusted in very fine increments.
Materials
Capstan Screws are available in A1 Stainless Steel as standard and a range of additional materials depending on your project requirements.
Prevent loosening and enhance the reliability of your Capstan Screws with Accu’s range of pre-applied thread-locking patches. From AccuLock Threadlocker for everyday security to Anu-Lok 180 for durability and Precote 80 for superior hold, we provide solutions to suit every application. Customise your components further with AccuBlack chemical blackening for a sleek, low-reflective finish.
Metric Capstan Screws
This range of components is manufactured according to DIN 404, and is available in metric diameters of between M3 and M6, and lengths of between 4mm and 30mm. Additional dimensions can also be custom manufactured on request, contact our sales team for more details.