M4 x 30mm Phillips Countersunk Screws (DIN 965H) - Black Stainless Steel (A2) Description
The M4 x 30mm Phillips Countersunk Screws (DIN 965H) - Black Stainless Steel (A2) has the following features:
- M4 (4mm) Thread Size (T)
- DIN 965H Manufacturing Standard
- 30mm Length (L)
- Stainless Steel (A2) Material
- Stainless Steel (A2) Material Specification
- 0.7mm Pitch
- 8.4mm Head Diameter (D) [Max]
- Matte Black Finish
- #2 Drive Size
- 90 degrees Countersunk Angle (CA)
- Metric Metric or Imperial?
- 2.2mm Countersunk Length (H)
- +/- 0.13mm General Tolerance
- 7.14mm Head Diameter (D) [Min]
Discover more about the Metric Phillips Countersunk Screws range.
Accu’s Metric Phillips Countersunk Screws are fitted with a standard Phillips head. Phillips heads have been widely used throughout the fastener industry since their invention in 1935. Modern engineers may argue that more recent drive types such as Pozi & Torx offer superior torque and less cam out. If you'd like to investigate these modern drive types, please visit our parent countersunk screw category.
Phillips Countersunk Screws can be manufactured in a range of materials, including Stainless Steel, Aluminium, Brass, and Phosphor Bronze. Specialist thermoplastics such as PEEK, Polyamide and Nylon are also available. Additional finishes, such as Chemical Blackening and Thread Locking Patches, can be applied to Stainless Steel components on request.
Accu’s Phillips Countersunk Screws are manufactured in accordance with DIN 7985H, and are available as standard in metric sizes ranging from M1.4 up to M10. Lengths of between 2.00mm and 150.00mm are also available.
Imperial Phillips Countersunk Screws are manufactured to the ANSI Standard B18.6.3. Diameters from #0 up to #6, and lengths of between 1/8 inch and 6 inch are available as standard. Additional sizes can be manufactured on request.