M4 x 70mm T20 Torx Raised Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) Description
The M4 x 70mm T20 Torx Raised Countersunk Screws (DIN 966) - Marine Stainless Steel (A4) has the following features:
- DIN 966 Manufacturing Standard
- 70mm Length (L)
- T20 Torx Size
- Marine Stainless Steel (A4) Material
- 316 Marine Grade Stainless Steel (A4) Material Specification
- 90 Degrees Countersunk Angle
- Natural Finish
- 1mm Raised Length (R)
- 0.7mm Thread Pitch
- Metric Metric or Imperial?
- M4 (4mm) Thread Size
- 7.5mm Head Diameter (D)
- 2.2mm Countersunk Length (H)
- +0/-0.36mm Head Diameter (D) Tolerance
- +2/-0 Degrees Countersunk Angle Tolerance
Discover more about the Torx Raised Countersunk Screws range.
AccuScrews’ Raised Hexalobular Countersunk Screws feature a Torx drive, also known as 6lobe, which prevents cam-out under high-torque operation. Raised Hexalobular Countersunk screws are intended for use with pre-drilled countersunk holes, and will sit flush with the target housing. The raised head of these components also gives them an aesthetically pleasing appearance. These components are designed for use with AccuScrews' Hexalobular Drive Bits.
In addition to A2 and A4 Stainless Steel, Torx Raised Countersunk Screws are available in a range of materials, including Aluminum, Brass, Phosphor Bronze and PEEK. Additional features such as Chemical Blackening and Thread Locking Patches are also available. All components within this range are precision rolled to achieve tolerances of ±0.13mm.
Metric
Torx Raised Countersunk screws are manufactured in metric sizes in accordance with DIN standard 966. These components can be purchased in diameters ranging from M2 to M8, and lengths of between 3.00mm and 100.00mm. Additional sizes can also be manufactured on request.