M10 x 130mm Metric Captive Hexagon Bolts (DIN 933) - Thread Locking Stainless Steel (A2) Description
The M10 x 130mm Metric Captive Hexagon Bolts (DIN 933) - Thread Locking Stainless Steel (A2) has the following features:
- DIN 933 Manufacturing Standard
- 130mm Length (L)
- 20mm Thread Length (E)
- 6.69mm Hexagon Length (H)
- Stainless Steel (A2) Material
- Stainless Steel (A2) Material Specification
- Thread Locking Finish
- 1.5mm Thread Pitch
- Metric Metric or Imperial?
- M10 (10mm) Thread Size
- 8mm Captive Diameter (d)
- 110mm Captive Length
- 17mm Hexagon Width A/F (J)
- +0/-0.43mm Hexagon Width A/F (J) Tolerance
- +0/-0.58mm Hexagon Length (H) Tolerance
Discover more about the Metric Captive Hex Bolts range.
Metric Captive Hex Bolts are designed with an unthreaded portion below the head. These components are designed for use with Accu’s range of Captive Washers. Captive fasteners are primarily used for safety reasons, and are required in certain safety equipment by EU law.
Captive Hex Bolts are just one of many captive fastener ranges available from Accu. For our full Captive Screws range, please see our Captive Screws section.
To find out more about Accu's Captive Screws, visit our What is a Captive Screw? page.
Metric Captive Hex Bolts
Captive Hex Bolts are available in metric sizes of between M2 and M12. Lengths range from 8mm up to 300mm.
Imperial Captive Hex Bolts
Imperial Captive Hex Bolts are manufacture in thread diameters of between No.4 and 1 inch. Lengths are available between 1 inch and 12 inch.
Custom Manufactured Captive Screws
Accu have the capabilities to custom manufacture Captive Screws and Captive Bolts on request. If the exact product you require is not listed among our standard ranges, please contact us or submit a technical drawing to MADEbyACCU for a quotation.