TR16x4 (16mm x 4mm Lead) x 910mm Trapezoidal Leadscrews - C15 Carbon Steel Description
The TR16x4 (16mm x 4mm Lead) x 910mm Trapezoidal Leadscrews - C15 Carbon Steel has the following features:
- ISO 2901, 2902, 2903, 2904 Manufacturing Standard
- Carbon Steel (C15) Material
- EN 10084 C15E - 1.1141 Material Specification
- 910mm Lead Screw Length (L)
- 200µm / 300mm Lead Accuracy
- Right Screw Hand
- 1.06kg Weight
- 7e Thread Tolerance
- 4mm Lead (LD)
- 1 Number of Starts
- 16mm Lead Screw Diameter (D)
- +5/-0mm Lead Screw Length (L) Tolerance
Discover more about the Trapezoidal Leadscrews - Carbon Steel (C15) range.
C15 Carbon Steel Metric Trapezoidal Leadscrews are designed for highly precise linear actuation. The trapezoidal tooth profile of these Leadscrews gives them enhanced tooth strength, and greater load-bearing capabilities. These components have a tooth angle of 30°, which is slightly shallower than that of an ACME Leadscrew, allowing for enhanced efficiency and greater tooth strength.
Trapezoidal lead Screws are fully compatible with Accu's range of Trapezoidal Leadscrew Nuts.
Trapezoidal Leadscrew Metric Sizes
Trapezoidal Leadscrews in C15 Carbon Steel are available in metric lengths of between 200mm and 3000mm. Diameters range from 10mm up to 80mm. The lead of each C15 Trapezoidal Leadscrew can range from 2mm up to 10mm.
C15 Carbon Steel (1.1141/EN 10084)
Leadscrews within this range are manufactured from C15 grade Carbon Steel, which has a surface hardness of approximately 160-180 HB. C15 Carbon Steel has a lower Carbon content than C45 Carbon Steel, making it less brittle due to fewer impurities.
C45 Carbon Steel Trapezoidal Leadscrews are also available, as well as 18-8 / 304 Stainless Steel Leadscrews and 316 Stainless Steel Leadscrews.